Omron NX1 Series Manual page 15

Cables / Connectors (For EtherCAT or EtherNet/IP (100BASE-TX))
Wire Gauge and Number of Pairs: AWG24, 4-pair Cable
Item
Cables
RJ45 Connectors
*1. We recommend you to use above cable and connector together.
Wire Gauge and Number of Pairs: AWG22, 2-pair Cable
Item
Cables
RJ45 Assembly Connector
*1. We recommend you to use the above Cable and OMRON's RJ45 Assembly Connector together.
Note: Connect both ends of cable shielded wires to the connector hoods.
Optional Products/Maintenance Products/DIN Track Accessories
Product Name
Memory Cards
Battery
End Cover
DIN Tracks
End Plate
Unit/Terminal Block Coding Pins
DIN Track Insulation Spacers
*1. HMC-SD1A1 can be used for a CPU Unit with unit version 1.32 or later.
Appearance
--- Hitachi Metals, Ltd.
--- Kuramo Electric Co.
--- SWCC Showa Cable Systems Co.
--- Panduit Corporation
Appearance
--- Kuramo Electric Co.
--- JMACS Japan Co., Ltd.
OMRON
SD memory card, 2 GB
The HMC-SD291 Memory Card is provided with the NX102-@@20.
SDHC memory card, 4 GB
SDHC memory card, 16 GB
Refer to the Battery page for details.
Must be connected to the right end of the CPU Rack.
One End Cover is provided with the CPU Unit
Length: 0.5 m, Height: 7.3 mm
Length: 1 m, Height: 7.3 mm
There are 2 stoppers provided with CPU Units and I/O Interface Units as standard acces-
sories to secure the Units on the DIN Track.
For 10 Units
(Terminal Block: 30 pins, Unit: 30 pins)
A Spacer to insulate the control panel from the DIN Track.
To insulate the EtherCAT Slave Terminal from the control panel, use DIN Track Insulation
Spacers.
Machine Automation Controller
Recommended manufacturer
Recommended manufacturer
Specification
NX1
Model
NETSTAR-C5E SAB
0.5 × 4P CP *
1
KETH-SB * 1
1
FAE-5004 *
MPS588-C * 1
Model
KETH-PSB-OMR * 1
PNET/B * 1
XS6G-T421-1 * 1
Model
HMC-SD291
HMC-SD491
HMC-SD1A1 * 1
CJ1W-BAT01
NX-END02
PFP-50N
PFP-100N
PFP-M
NX-AUX02
NX-AUX01
15