Omron NX1 Series Manual page 27

SD Memory
Card backups
Backing up
data
Safety Unit Restore from SD Memory Card
Sysmac Studio Controller backups
*1. Inline ST is supported. (Inline ST is ST that is written as an element in a ladder diagram.)
*2. When connected to a CPU rack.
*3. Minimum value fulfills all these conditions.
• Larger than 5 ms
• Constant number multiple of primary periodic task cycle
Item
CPU Unit front-panel
DIP switch
Specification with
system-defined
Operating
variables
methods
SD Memory Card
Window in Sysmac
Studio
Special instruction
Disabling backups to
Protection
SD Memory Cards
Machine Automation Controller
You can perform backup, verification, and restoration operations by manipulating
the front-panel DIP switch on the CPU Unit
You can perform backup, verification, and restoration operations by manipulating
system-defined variables
Backup and verification operations are performed from the SD Memory Card Win-
dow of the Sysmac Studio
The special instruction is used to backup data
Backing up data to a SD Memory Card is prohibited
Restores the data of the Safety CPU Unit using the front-panel DIP switch on the
Safety CPU Unit and SD Memory Card
The Sysmac Studio is used to backup, restore, or verify controller data
NX102
NX1
27