Product Overview - YASKAWA PROFINET 1000 Series Technical Manual

2 Product Overview

2 Product Overview
About This Product
The SI-EP3 option connects the 1000-series drives to a PROFINET network and facilitates the exchange of data.
This manual explains the handling, installation and specifications of this product.
The SI-EP3 option is a simple, networking solution that reduces the cost and time to wire and install factory automation
devices, while providing interchangeability of like components from multiple vendors.
By installing the option to a drive, it is possible to do the following from a PROFINET master device:
• Operate the drive
• Monitor the operation status of the drive
• Change parameter settings.
SI-EP3 is PROFINET Conformance Class A certified.
Applicable Models
The option can be used with the drive models in
Drive Series
A1000
iQpump1000
P1000
<1> See "PRG" on the drive nameplate for the software version number.
6
Table 1.
Table 1 Applicable Models
Drive Model Number
CIMR-A 2A
CIMR-A 4A
CIMR-A 5A
CIMR-A 4A0930~1200
CIMR-PW2A
CIMR-PW4A
CIMR-PW5A
CIMR-PW4A0930~1200
CIMR-PU2A
CIMR-PU4A
CIMR-PU5A
CIMR-PU4A0930~1200
YASKAWA SIEP YEACOM 07A 1000-Series Option PROFINET SI-EP3 Technical Manual
Software Version
<1>
VSA90101
VSA90504
VSA90101
VSA903014 and later
VSA8550 and later
VSA903750 and later
VSA8500 and later
VSA903700 and later