Cisco cBR Series Hardware Installation Manual page 24

Cisco cBR-8 Converged Cable Access Router Supervisor 160G
Figure 10: Supervisor Card
1 Spring-loaded ejector
2 Tethered I/O door
3 Plastic latch
4 Removable air filter
Table 9: Physical Specifications of the Supervisor Card
Unit
Depth
Width
Height
Maximum weight
Table 10: Ports on the Supervisor Card
Port
USB ports
Console port
Cisco Converged Broadband Routers Hardware Installation Guide
16
What is a Cisco cBR Series Converged Broadband Router
5 LEDs
6 Support rails
7 USB ports
8 Console port
Value
20 in (50.8 cm)
17.2 in (43.68 cm)
2.8 in (7.11 cm)
26 lb (11.79 kg)
Description
The Supervisor Card has two type-A USB ports. These
ports are used for connecting external memory sticks
or flash drives to load configurations.
The Supervisor Card has one mini type-B USB
console port. This port is an asynchronous
EIA/TIA-232 serial port used to connect a terminal
to the Supervisor Card for local administrative access.