Siemens SIMATIC ET 200SP Manual page 42

Module parameter block
The figure below shows the structure of the module parameter block.
Enable a parameter by setting the corresponding bit to "1".
Figure A-4
Channel header information
The figure below shows the structure of the channel header information.
Figure A-5
Analog input module AI 2xU/I 2-/4-wire HS (6ES7134-6HB00-0DA1)
Manual, 09/2018, A5E03576060-AF
A.2 Parameter assignment and structure of the parameter data record
Module parameter block
Channel header information
Parameter data record
41