Siemens SIMATIC ET 200SP Manual page 12

Properties
The module has the following technical properties:
● Analog input module with 2 inputs
● Measurement types voltage and current for 2-/4-wire transducers
● Input ranges for voltage measurement:
– ±10 V, resolution 16 bit including sign
– ±5 V, resolution 15 bit incl. sign
– 1 to 5 V, resolution 13 bit
– 0 to 10 V, resolution 15 bit
● Input ranges for current measurement:
– ±20 mA, resolution 16 bit incl. sign
– 4 to 20 mA, resolution 14 bit
– 0 to 20 mA, resolution 15 bit
● Electrically isolated between the channels
● Electrically isolated from supply voltage L+
● Permitted common mode voltage: 100 V
● Configurable diagnostics (per channel)
● Hardware interrupt on limit violation can be set per channel (two high and two low limits
per channel)
The module supports the following functions:
● Firmware update
● I&M identification data
● Reconfiguration in RUN
● PROFIenergy
Table 2- 1
Basic version
Isochronous mode with send clock up to 250 µs
Value status
Oversampling channel 0
Oversampling channel 0 and 1
Isochronous mode with send clock up to 125 µs
Analog input module AI 2xU/I 2-/4-wire HS (6ES7134-6HB00-0DA1)
Manual, 09/2018, A5E03576060-AF
Version dependencies of other module functions
Function
/35 V
pp rms
Product version of
the module as of
1
2
2
2
2
2
Product overview
2.1 Properties
Firmware version of
the module as of
V1.0.0
V1.1.0
V1.1.0
V1.1.0
V2.0.0
V2.0.1
11