Setting The Language; Measuring The Water Hardness - Saeco 10000241 Operating And Maintenance Manual

INSTALLATION
6

SETTING THE LANGUAGE

When the machine is switched on for the fi rst time, it requires the selection of the desired language.
This allows you to adjust the parameters of the beverages to the typical parameters of the country
where the machine is used. This is why some languages are differentiated also by country.
1
2.1 language
English
2.
1.
Select the desired language by
navigating the click wheel with
your fi nger.
4
warming up
Wait until the machine completes
the warming phase.

MEASURING THE WATER HARDNESS

The water hardness test strip is for one-time-use only.
1
Immerse the water hardness test strip
in water for 1 second.
2
2.1 language
English
When the desired language is
displayed, press .
5
rinse cycle
please wait
Once the warming phase is
completed, a small quantity of
water is dispensed. Wait for this
rinsing to be completed
automatically. Refer to page 19 to
enable/disable the rinsing function.
2
1
Check the water hardness value and set:
- the machine water hardness level (page 19);
- the Intenza Aroma system (page 7).
3
self-diagnosis
The machine starts and displays
all the messages in the selected
language.
6
The screen for beverage
dispensing appears on the
display.
Intenza Aroma System
A B
2 3
Machine water hardness setting
medium aroma
espresso
C
4