Intenza Water Filter - Saeco 10000241 Operating And Maintenance Manual

INTENZA WATER FILTER

To improve the quality of the water you use, and to extend the life of your machine at the same time, it is
recommended that you install the water fi lter. After installation, select the water fi lter function under the
maintenance menu (see page 20). By setting the water fi lter status to ON, the machine informs the user when
the fi lter must be replaced.
Remove the water fi lter from its packaging, immerse it vertically (with the opening facing upwards) in
cold water and gently press its sides so as to let the air bubbles out.
1
Remove the small white fi lter from
the water tank and store it in a dry
place sheltered from dust.
4
Fill the water tank with fresh
drinking water and re-insertit into
the machine.
7
3.1 filter
Scroll to "fi lter" and press
again.
When the machine has fi nished, turn the knob until it is in the rest position ( ). Press
"exit" message is displayed. Then press
is not used, insert the small white fi lter previously removed (see step 1) into the water tank.
2
Set the Intenza Aroma System:
A = Soft water
B = Medium water (standard)
C = Hard water
5
Place a container beneath the
steam/hot water spout.
8
3.1.3 activate
execute now
1.
2.
Select "activate" and press the
button.
. The machine is now ready for use. NOTE: if the Intenza water fi lter
3
Insert the fi lter in its place within
the empty tank (see fi gure);
Press down until it clicks into
place.
6
3 maintenance
2.
1.
3.
Press .
Select "maintenance" and press the
button.
9
Turn the knob to the
Water dispensing begins.
a few times until the
7
position.