Group Washing - Saeco 10000241 Operating And Maintenance Manual

MAINTENANCE
24
16
Turn the knob until it is in the rest
position ( ).

Group washing

> maintenance > group wash
This function is used to clean the machine's internal circuits used for brewing coffee.
To wash the Brew Group, simply clean with water as shown on page 26. This wash completes the
maintenance process of the Brew Group. We recommend performing this cycle on a monthly basis (or
every 500 coffees), using the Saeco tablets, which can be purchased separately.
Note: before performing this function make sure that:
1. a large enough container is positioned under the spout;
2. the appropriate tablet for cleaning the Brew Group has been inserted into the
compartment for pre-ground coffee;
3. the water tank contains a suffi cient quantity of water.
THE WASH CYCLE CANNOT BE INTERRUPTED.
A PERSON MUST BE PRESENT DURING THE OPERATION.
1
3.3.1 group wash
execute now
Please refer to page 20 to access
the "group wash" menu.
Press the button to confi rm.
4
passage
[2/3]
You can check the status of the
cleaning cycle on the display.
Check the quantity of water contained in the tank and,
if desired, install the water fi lter again or re-insert the
small white fi lter (see page 7).
When descaling is complete, return to the main menu
to brew beverages.
2
insert tablet
and press ok
Insert the cleaning tablet as shown
above.
Press to start.
5
wash completed
please wait
3
group wash
please wait
Wait for the cycle to begin.
6
3 maintenance
The Brew Group has been washed. To
exit the programming mode, press the
MENU button (see page 18).