Manual Priming Of The Water Circuit; Setting The Language And The Clock - Saeco PRIMEA TOUCH PLUS Operation And Maintenance Manual

6 INSTALLATION

MANUAL PRIMING OF THE WATER CIRCUIT

Manually prime the water circuit only when the following
display appears.
Note: fi rst make sure that the water tank is full.
1
Position a container under the hot
water spout (it is possible that
water will not come out of the
spout).

SETTING THE LANGUAGE AND THE CLOCK

These settings allow you to regulate the machine parameters to dispense coffee according to the
typical parameters of the country where it is used. For this reason, the languages are also
differentiated by location.
1
show icon
my custom
explanation coffee
Press "programming menu".
4
deutsch
language
français
1/2
italiano (ch)
nederlands
go
back
Select the desired language.
2
priming the machine
Press the display once and the
machine will begin priming the
water circuit.
2
machine
settings
specials
main-
tenance
program-
go in
ming
standby
menu
Press "machine settings".
5
machine
Italiano (i)
settings
english
specials
main-
tenance
go in
back to
standby
menu
Return to the main menu.
Press "timer"
priming the machine
start
beverage
settings
main
extras
menu
timer
go back to
make coffee
beverage
settings
main
extras
menu
timer
go back to
make coffee
avvio
3
When the prime circuit cycle is
fi nished, remove the container.
The machine is now ready for
use.
3
cup
language
illumination
machine
display
settings
alerts & cup
tones warmer
restore
go back standars
values
Press "language".
6
settings
timer
standby
settings
settings
go
back
See page 33 to adjust the clock.
water
fi lter
water
hardness
rinsing
back to
menu
time
timer
back to
menu