Saeco 10001872 Operating And Maintenance Manual page 45

42 CLEANING AND MAINTENANCE
10
Apply the grease evenly.
GRINDER MAINTENANCE
After approximately 2000 grinding cycles, the grinder needs a slight adjustment to ensure it is running in
peak condition.
WARNING!
This operation should be carried out carefully and by an experienced user. The screw could fall into the
grinder; if this happens, remove it before restarting the machine. Protect the grinder hole with a cloth to
avoid this problem.
The snap is signalled by a message on the coffee bean hopper; refer to these messages when this
adjustment is performed.
EMPTY THE COFFEE BEAN HOPPER.
1
strong aroma
espresso coffee 08:33
Press and dispense two coffees.
4
Unscrew the screw that holds the
grinder door closed.
Then reposition the grinder door and attach it with the previously removed screw.
11
Insert the washed and dried brew
group. DO NOT PRESS THE
"PUSH" BUTTON.
2
out of coffee
espresso coffee 08:33
When the above screen appears,
press just once.
5
Remove screws and grinder door.
12
Close the service door and insert
the coffee dregdrawer.
3
Once the cycle has ended, turn
off the machine and unplug it.
6
Adjust until it clicks.