Coffee cleaning cycle
> machine settings > maintenance > coffee cleaning cycle
To clean the machine's internal circuit used for brewing coffee.
To wash the brew group, simply clean with water as shown on page 41. This wash completes maintenance of
the brew group. Packages of Saeco detergent tablets may be purchased directly from Saeco or an authorized
service center.
It is advisable to perform this wash cycle after 500 coffee brewing cycles, or monthly.
Note: Before performing this function make sure that:
1. a large enough container is positioned under the spout;
2. the appropriate tablet for cleaning the brew group has been inserted into the
pre-ground bypass doser;
3. the water tank contains a suffi cient quantity of water
THE WASH CYCLE CANNOT BE INTERRUPTED.
A PERSON MUST BE PRESENT DURING THE OPERATION.
1
machine settings
maintenance
1.
2.
4
insert cleaning tablet
coffee cleaning cycle
Insert the tablet as shown above.
Press
to start.
7
Exiting programming mode.
(see page 19)
2
maintenance
coffee cleaning cycle
1.
2.
5
in progress
coffee cleaning cycle
Wait for the cycle to complete.
THE MAINTENANCE AND CLEANING OF THE BREW
GROUP IS DESCRIBED ON PAGE 41.
3
yes
coffee cleaning cycle
1.
2.
6
done
coffee cleaning cycle
When the cleaning cycle has
fi nished, press
to confi rm.
25