Saeco 10001872 Operating And Maintenance Manual page 36

STANDBY SETTING
> machine settings > stand-by setting
stand-by setting
stand-by
set the stand-by mode (time which must pass
before the machine enters the stand-by mode
after the last dispensing).
Energy Saving
> machine settings > stand-by setting > stand-by
By default, the energy saving time is set at 1 hour.
1
stand-by setting
stand-by
1.
2.
Timer setting
> machine settings > stand-by setting > timer setting
The timers can operate only if activated by the "timer activation" function. If this is not the case, the timers
will have no effect on the machine.
Note: The energy saving time time previously set is always valid. It will be activated also during the time intervals
set and activated in this function. If necessary, adjust the energy saving time.
1. Activating the timers
1
timer setting
timer activation
1. 1.
2. 2.
machine settings
stand-by setting
In this menu you can:
set the timers (activation of on/off times
– setting one on/off time a day)
2
after 1 hour
stand-by
1.
2.
2
no
timer activation
1. 1.
2. 2.
stand-by setting
timer setting
3
Select by navigating the
click wheel with your fi nger.
It is possible to set:
- after 15 minutes
- after 30 minutes
- after 1 hour
- after 3 hours
Press the button to save.
3
You can set:
- yes (the machine turns on
and off at the times set)
- no (the machine ignores
the times set)
Press the button to save.
33