Saeco 10001872 Operating And Maintenance Manual page 25

22 PROGRAMMING THE MACHINE
RINSE CYCLE
> machine settings > rinse cycle.
To clean the internal circuits in order to guarantee that the beverages are dispensed only with fresh water.
This function is activated by default by the manufacturer.
1
machine settings
1.
2.
Note: This rinse cycle is performed every time the machine is turned on after the warming phase.
WATER HARDNESS MENU - INTENZA AROMA SYSTEM
> machine settings > water hardness.
To adjust your machine and the Intenza water fi lter to the level of hardness of the water you use, so that the
machine will request descaling at the right moment.
The water hardness in the Intenza water fi lter is expressed on a scale from A to C.
The water hardness in the machine is expressed on a scale from 1 to 4.
1
Immerse the water hardness test
strip (included in the accessories)
for one second in water.
The test strip can be used
only for one measurement.
3
machine settings
1.
2.
2
machine settings
rinse cycle
1.
2.
2
1 2
Machine water hardness setting
Check the water hardness level obtained from the test.
The measurement can be used to set the Intenza Aroma
System correctly (see page 7). Matching parameters are
described on the upper part.
4
machine settings
water hardness
1.
2.
3
Select by navigating the click
wheel with your fi nger.
It is possible to set:
- yes
- no
Press the button to save.
Intenza Aroma System
A B
3 4
5
- 3
water hardness
1.
Set and store the water hardness
according to the value on the test strip.
C
+
2.