Saeco 10001872 Operating And Maintenance Manual page 33

30 PROGRAMMING THE MACHINE
In order to run a descaling cycle before the machine indicates the necessity to do so:
1
machine settings
maintenance
1.
2.
Insert the descaling solution
and press the button to
begin.
4
descaling
descaling cycle
The machine begins to
dispense the descaling solution
through the hot water spout.
The dispensing occurs at
preestablished intervals, in
order to allow the solution to be
more effective.
7
rinse cycle
descaling cycle
Rinse the machine's circuits by
pressing the button.
When descaling is complete, perform a cleaning and maintenance cycle on the milk container as described on page 39-40.
2
maintenance
descaling cycle
1.
2.
When the cycle is fi nished the
following message appears on
the display:
5
fill water tank
descaling cycle
Remove the water tank, rinse
with fresh drinking water to
eliminate traces of descaling
solution, then refi ll with fresh
drinking water.
8
rinsing
descaling cycle
The machine performs the rinse
cycle. During the rinse cycle, the
machine may require the water
tank to be fi lled.
3
yes
descaling cycle
1.
2.
6
insert tank
descaling cycle
Insert the tank back on onto the
machine.
9
done
descaling cycle
Press the button and exit the
programming by pressing the
button. Check the quantity of water
contained in the tank and, if desired,
install the water fi lter or reinsert the
small white fi lter (see page 7).