11. QoS
11.1 Configuration
CLI
config
ACLI
config terminal
11.1.1 Enable DiffServ
CLI
ethernet <slot/port> enable-diffserv <false|true>
ACLI
interface gigabitEthernet <slot/port>
enable-diffserv enable
exit
VSP 7000:
qos if-group name trust class trusted
qos if-assign port <ports> name trust
Please note that only the ERS 8800 required DiffServ to be enabled as the default value is
disabled on all ports. In regards to the VSP 7000 and VSP 9000, DiffServ is enabled by default
on all ISIS enabled ports. Hence, the above steps are not required and only shown for
information purposes.
February 2013
Avaya Inc. – External Distribution
avaya.com
42