Table of Contents
Advertisement
LED State
Green
Red (flashing)
② Audio Input (Block Connector)
Block Pin Assignments:
③ Chassis Ground Screw
Provides an optional connection for microphone shield wire to chassis ground.
④ Audio Output (Block Connector)
Balanced audio output connects to an analog device. Set the output level in Shure Designer software to match the input
sensitivity of the analog device.
Note: See front panel labels for block connector assignments.
⑤ USB Port
Connects to a computer to send and receive any combination of input and output audio channels.
⑥ LED Indicators
Power: Power over Ethernet (PoE) present
Note: Use a PoE injector if your network switch does not supply PoE.
Network: Network connection active
Network Audio: Dante audio present on the network
Note: Error details are available in the event log in Shure Designer software.
Network Audio LED Behavior
LED Status
Off
Green
Red
Encryption:
LED Status
Off
Green
Status
USB device operating successfully
Problem detected with connected USB audio device
Audio +
Audio -
Audio ground
Activity
No active signal
Device is operating successfully
Error has occurred. See event log for details.
Activity
Audio not encrypted
Successful encrypted audio connection with another device
Shure Incorporated
8/31
Advertisement
Table of Contents
