Pushing Device Names To The Dante Network; Compatibility With Dante Domain Manager; Ip Ports And Protocols - Shure ANIUSB-Matrix User Manual

Pushing Device Names to the Dante Network

To send a device name to appear in Dante Controller, go to Settings>General and enter a Device Name. Select Push to Dante
to send the name to appear on the network.
Note: names appear in Dante Controller with "-d" attached.

Compatibility with Dante Domain Manager

This device is compatible with Dante Domain Manager software (DDM). DDM is network management software with user au-
thentication, role-based security, and auditing features for Dante networks and Dante-enabled products.
Considerations for Shure devices controlled by DDM:
• When you add Shure devices to a Dante domain, set the local controller access to Read Write. Otherwise, you won't be
able to access to Dante settings, perform a factory reset, or update device firmware.
• If the device and DDM can't communicate over the network for any reason, you won't be able to control Dante settings,
perform a factory reset, or update device firmware. When the connection is reestablished, the device follows the policy set
for it in the Dante domain.
• If Dante device lock is on, DDM is offline, or the configuration of the device is set to Prevent, some device settings are dis-
abled. These include: Dante encryption, MXW association, AD4 Dante browse and Dante cue, and SCM820 linking.
See Dante Domain Manager's documentation
Note: Applies to firmware 4.1.x and newer.

IP Ports and Protocols

Shure Control
Port TCP/UDP Protocol
21 tcp FTP
22 tcp SSH
23 tcp Telnet
68 udp DHCP
80* tcp HTTP
443 tcp HTTPS
161 tcp SNMP
162 tcp SNMP
2202 tcp ASCII
5353 udp mDNS
5568 udp SDT
8023 tcp Telnet
8180 tcp HTML
for more information.
Description
Required for firmware updates (otherwise closed)
Secure Shell Interface
Not supported
Dynamic Host Configuration Protocol
Required to launch embedded web server
Not supported
Not supported
Not supported
Required for 3rd party control strings
†
Required for device discovery
†
Required for inter-device communication
Debug console interface
Required for web application
Shure Incorporated
Factory De­
fault
Closed
Closed
Closed
Open
Open
Closed
Closed
Closed
Open
Open
Open
Closed
Open
24/31