Table of Contents
Advertisement
Setting Up Mute Sync on the MXA310 and ANIUSB-MATRIX
Use this setup to mute the ANIUSB-MATRIX by pressing the mute button on the MXA310. In the ANIUSB-MATRIX's signal
chain, muting happens after the inputs.
1.
Open the ANIUSB-MATRIX in Designer and go to Inputs.
2.
On any channel strip, select Logic enable. This enables logic on all channels.
3.
Open the MXA310 in Designer and go to Settings > Logic control.
4.
Set the Mute control function to Logic out.
5.
Go to Lights. Set the style to Ring.
Encryption
Encryption operates at the location level in live mode only, meaning that all devices included in this location must have these
settings. Audio is encrypted with the Advanced Encryption Standard (AES -256), as specified by the US Government National
Institute of Standards and Technology (NIST) publication FIPS-197. Encryption is not supported with third-party devices.
To activate encryption:
1.
Click Encryption.
2.
Select Enable Encryption.
The other options allow you to re-key the encryption or disable it if encryption had previously been enabled and you no longer
want it.
Important: For encryption to work:
•
Encryption must be universally enabled or disabled on all connected Shure devices in the same location.
•
AES67 must be disabled in Dante Controller to turn encryption on or off. AES67 encryption is currently not supported.
Note: Encryption will not work between devices on 3.x and 4.x firmware. Update all devices to same the major firmware version to use encrpytion.
Networking and Dante
Dante Transmit Flows
This device supports up to two transmit flows and two receive flows. A single flow consists of up to four channels, through
either a unicast or multicast transmission.
•
A unicast flow is a point-to-point connection between two devices, supporting up to four channels per flow.
•
A multicast flow is a one-to-many transmission, which supports sending up to four channels to multiple receiving devices
across the network.
Shure Device Applications
This device can connect with up to two Dante devices.
The Shure MXA310, ANI22, ANIUSB-MATRIX and ANI4IN support multicast transmission. This means that flows can transmit
to multiple devices -- as many as the network can support. If using unicast flows, each of these devices can connect with up to
two Dante receiver devices.
The Shure ANI4OUT connects with up to two Dante transmitter devices.
Shure Incorporated
23/31
Advertisement
Table of Contents
