Omron R88L-EA-AF Installation Manual page 34

1 ENGLISH
If you are using the standard mounting plate, assemble the plate.
Make sure to bring the pins and pin holes into correct alignment.
Fasten the mounting plate to the carriage. Use the following screws for this purpose:
• R88L-EA-AF-03: 6 screws M4x14
• R88L-EA-AF-06: 8 screws M5x20
• R88L-EA-AF-11: 8 screws M6x20
Always observe the torque specified in Section 1-6-1 Mechanical Integration. Please use
a torque wrench.
1 - 30
Accurax Linear Axis Installation Manual