Table of Contents
Advertisement
PROGRAM MODE
Mode No.
Lower Paper
Feed Tray
Copy Counter
Display
102
DF Original
Counter
Display
106
Fusing Idling
116
Total Service
Calls
130
Total Misfeeds Displays the total number of misfeeds excluding
131
Displays the total (electrical) copy counter for the
lower paper feed tray.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
*
The first three digits are displayed in the
magnification indicator.
Press the
key to view the last three digits.
Displays the total (electrical) number of originals fed
from the DF.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
*
The first three digits are displayed in the
magnification indicator.
Press the
key to view the last three digits.
Selects fusing idling during warm-up. This mode
should be used for troubleshooting purposes only.
See "Detailed Descriptions" for more details.
If this mode is selected, inform the customer
that the first copy time will not be within
specification.
This mode is enabled after turning the main switch
off/on.
Displays the total number of service call conditions.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
*
The first three digits are displayed in the
magnification indicator.
Press the
key to view the last three digits.
original misfeeds in the DF.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
*
The first three digits are displayed in the
magnification indicator.
Press the
key to view the last three digits.
Function
38
26 September 1997
Settings
0: No
1: Yes
Advertisement
Table of Contents
