Ricoh Grand Kingfisher A245 Service Manual page 38

PROGRAM MODE
Mode No.
Auto Shut Off
(Energy Star)
77 On/Off
Auto Energy
78 Saver Mode
On/Off
Factory
81
Initialization
Data
82
Communication
Factory
83 Potential
Adjustment
Total Copy
Counter
Display
88
Factory Data
90 and Counter
Clear
User Code
Counter Clear
92
V Correction
R
Reset
93
V Correction
L2
Reset
94
V Correction
L
Reset
95
Selects the "Automatic Shut off" mode.
The copier automatically shuts itself off at the auto
shut off time selected (SP14).
Selects the "Automatic Energy Saver" mode.
The copier automatically goes to Energy Saver
mode at the auto reset time selected (SP15).
Factory use only.
Factory use only.
Factory use only.
Displays the total (electrical) copy counter.
*
The first three digits are displayed in the
magnification indicator.
Press the key to view the last three digits.
The mechanical total counter and the electrical
total counter may not always display the same
value, because of initial differences in the
counter values.
Factory use only.
Resets all the user code counters (SP73).
*
To clear, enter "1" then press the
key at the same time.
Resets the drum residual voltage correction counter
*
for the VR correction.
To clear, enter "1" then press the
key at the same time.
Use this mode only after installing a new drum.
Resets the exposure lamp data and counter for the
V correction. Always perform this mode with SP95
L2
*
as a set.
To Clear, enter "1" then press the
key at the same time.
Normally not needed in the field, as this is handled
by SP48.
Resets the exposure lamp data and counter for the
V correction. Always perform this mode with SP94
L
*
as a set.
To clear, enter "1" then press the
key at the same time.
Normally not needed in the field, as this is handled
by SP48.
Function
key and the
key and the
key and the
key and the
36
26 September 1997
Settings
0: Yes
1: No
Default = 0 (NA)
Default = 1
(Others)
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes