Table of Contents
Advertisement
26 September 1997
Mode No.
Imaging Unit
Counter
Display
69
User Code
Mode
70
Sorter
71
Operation
User Code
Counter
Display
73
Special Paper
Size Setting
74
Sorter Bin
76
Capacity
Shows the total number of copies made so far by
the imaging unit installed in the machine. This
counter is reset by SP93.
*
The first three digits are displayed in the
magnification indicator.
Press the
key to view the last three digits.
Enables user code mode.
JP101 on the main board must be cut.
It this mode is set, operators must enter a code to
make copies. The user codes are the following 5
numbers:
1101, 2202, 3303, 4404, 5505
Enables sorter operation.
9
:
Displays the contents of each user code counter.
Use the
or
key to select a user code. The last
digit of the user code is displayed in the copy
counter. User counters count from 0 to 999999.
*
The first three digits are displayed in the
magnification indicator.
Press the
key to display the last three digits.
Sets the appropriate paper size for special paper
loaded in the paper feed tray.
The "
" mark on the paper size dial must be
selected to use this special feature.
When the paper feed tray is selected, the
appropriate paper size or the "
displayed and the copier will operate in accordance
with the set paper size.
Sets the stock quantity limits. If set to 1, the
maximum amount of copies depends on the paper
size (see the specifications for the sorter).
Function
" mark will be
35
PROGRAM MODE
Settings
0: No
1: Yes
0: No Sorter
1: Sorter Installed
0:
(Universal)
1: A3
2:
(Universal)
3: B4
4: A4
5: A4R
6: B5
7: B5R
8: A5
9: B6
13: DLT
14: LG
15: LT
16: LTR
17: HLT
19: F
27: 8 k
28: 16 k
(Sideways)
29: 16 k
(Lengthwise)
0: No limit
1: Limit
Advertisement
Table of Contents
