Ricoh Grand Kingfisher A245 Service Manual page 39

26 September 1997
Mode No.
Toner End
96 Force Cancel
Service Call
97 (E5) Reset
Total Counter
Clear
98
Clear All
Memory
99
By-pass Feed
Copy Counter
Display
100
Upper Paper
Feed Tray
Copy Counter
Display
101
The Toner End condition is canceled forcibly.
By pressing the
toner end condition is canceled.
Resets a service call (E5) condition.
Turn the main switch off and on to check if the
service call condition is reset.
Clears the total (electrical) counter.
Normally, this SP mode should not be
performed.
*
To clear, enter "1" then press the
key at the same time.
To avoid resetting the counter by mistake, the
counter is reset only when the
key are pressed at the same time.
Clears all counters and returns all modes to the
default settings. See the Clear All Memory
Procedure in this section for more details.
Normally, this SP mode should not be
performed.
This SP mode is required only when replacing the
EEPROM, or when the copier malfunctions due to a
damaged EEPROM.
*
To clear, enter "1" then press the
key at the same time.
To avoid resetting the counter by mistake, the
counter is reset only when the
key are pressed at the same time.
Displays the total (electrical) copy counter for the
by-pass feed table.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
*
The first three digits are displayed in the
magnification indicator.
Press the key to view the last three digits.
Displays the total (electrical) copy counter for the
upper paper feed tray.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
*
The first three digits are displayed in the
magnification indicator.
Press the key to view the last three digits.
Function
key to enter this SP mode, the
key and the
key and the
key and the
key and the
37
PROGRAM MODE
Settings
0: No
1: Yes
*
0: No
1: Yes
*