Ricoh Grand Kingfisher A245 Service Manual page 28

PROGRAM MODE
Mode No.
Output Check Use to turn on individual electrical components.
9
!
Enter the desired number given in the following
table.
$
Press the key to turn on the electrical
component.
Press the key to turn off the electrical
component.
Component
Electrical Component
No.
Main Motor + Quenching
1 Lamp + Exhaust Fan
Motor (High Speed)
2 Charge Corona
3 Transfer Corona
4 Discharge Plate
Development Bias Voltage
5
6 Erase Lamp
Machine Shut Off
7
Exhaust Fan Motor
8
(High Speed)
9 Optics Cooling Fan
Exposure Lamp + Optics
10
Cooling Fan
11 Toner Supply Motor
Toner Supply Motor
12
(Reverse)
14 Sorter Roller Drive Motor
Sorter Bin Drive Motor
15
(Bin Up)
Sorter Bin Drive Motor
16
(Bin Down)
17 Registration Clutch
18 By-pass Paper Feed Clutch
Upper Tray Paper Feed
*19
Clutch
Lower Tray Paper Feed
*20
Clutch
*21 Upper Relay Roller Clutch
*22 Lower Relay Roller Clutch
23 Total Counter
24 Key Counter
* Newly added or modified items from the A219 copier.
Function
Standard Voltage
for Manual ID Level
4.
All LEDs On
Main Switch Relay
Off.
Moves One Bin Up.
Moves One Bin
Down.
Not Used
26
26 September 1997
Settings
Note