Table of Contents
Advertisement
G
ETTING
VCR to TV Connection using the RF connection
Connection
Diagram
Outdoor antenna
Cable
CAUTION
Do not plug the AC power cords until all
connections are completed.
VCR to AV TV Connection Using the SCART Connection
Make this connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference.
And if you are using a stereo TV, you will need this cable in order to enjoy stereo playback of videotapes.
1. Complete the VCR to TV connection
using RF Connection.
2. Connect the scart cable between the AV1
IN/OUT connector of the VCR and the
TV's 21-pin AV input connector
(SCART).
3. Set the AV1 OUT switch to either one of
the following position,
COMP: If your TV's SCART is
compatible only with the regular
video signal.
Y/C:
If your TV's SCART is
compatible with a signal which
the luminance and chrominance
signals are separated (Y/C
signal). This setting gives you
high-quality S-VHS pictures.
C
ONNECTED
To connect to a TV with No 21-pin AV input connector.
1 Disconnect the antenna or cable from the TV and the AC power cord
of the TV from the AC outlet.
2 Connect the antenna or cable to the VCR.
3 Connect the VCR to the TV using the RF coaxial cable.
4 Plug the AC power cords of the VCR and TV into the AC outlets.
Indoor antenna
Back of VCR
U
ANT. IN
S OUT
AV1 OUT
L
AV1 IN/OUT
AUDIO
COMP. Y/C
OUT
R
AV2 IN/DECODER
PAUSE
RF OUT
LP30363-002
LP20654-002
RF OUT
S OUT
AV1 OUT
AV1 IN/OUT
COMP. Y/C
AV2 IN/DECODER
LP30363-002
LP20654-002
AV1 OUT
COMP. Y/C
— 9 —
P
ANT. IN
RF coaxial cable
(supplied)
From antenna
ANT. IN
L
AUDIO
OUT
R
PAUSE
RF OUT
To TV
To TV`s 21-pin
21-pin
input connector
SCART cable
(SCART)
Back of TV
Hide quick links:
Advertisement
Table of Contents
