Getting Connected Up; Vcr To Tv Connection; Vcr To Av Tv Connection Using Scart Cable - Philips VR388/55 User Manual

G
ETTING

VCR to TV Connection

Connection
Diagram
Outdoor antenna
Cable
CAUTION
Do not plug the AC power cords until all
connections are completed.

VCR to AV TV Connection Using SCART Cable

With this connection, you can get better pictures and sounds when playing back a tape.
To watch a picture from this VCR on the
TV, select the video input on the TV, to which
this VCR is connected.
Use the appropriate SCART cable depending
on the TV's AV terminal.
VR388/588-55 EN (N)
C
ONNECTED
1 Disconnect the antenna or Cable from the TV and the AC power
cord of the TV from the AC outlet.
2 Connect the antenna or Cable to the VCR.
3 Connect the VCR to the TV using the RF coaxial cable.
4 Plug the AC power cords of the VCR and TV into the AC out-
lets.
Indoor antenna
Back of VCR
To watch a picture from this VCR on the TV, select UHF E36
channel (video channel of this VCR when shipped from the factory).
If you want to change video channel, see "Setting the Video Chan-
nel" ( .P10).
To AV1 IN/OUT terminal
9
U
P
ANT. IN
ENTREE
ANT.IN
ANTENNE
AV1 ENTREE/SORTIE
SORTIE
IN/OUT
RF. OUT
002
RF coaxial cable
RF OUT (supplied)
Back of VCR
ENTREE
ANT.IN
ANTENNE
ENTREE/SORTIE
AV1
SORTIE
IN/OUT
RF. OUT
002
SCART cable
— 9 —
6/1/99, 9:02 AM
Back of TV
VH F
UH F
Back of TV
To AV
terminal
OUT
IN: (Not used)