Table of Contents
Advertisement
If you want to descramble
programmes when receiving
scrambled broadcasts
When you can receive a scrambled
broadcast, you can descramble the
programme by connecting this VCR to
an external decoder through the VCR's
AV2 IN/DECODER connector.
Complete the connection described on
page 34 and follow the instructions
below;
1 Press MENU to access main menu
screen.
5
∞
2 Press
or
to select "MODE
SET", then press OK or
The mode set screen appears.
5
∞
3 Press
or
to select "AV2
SELECT".
3
4 Press OK or
to select "DE-
CODER" then press MENU to exit.
MODE SET
PREVIOUS PAGE
AV1 SELECT
VIDEO
AV2 SELECT
=
5∞
[
]
[MENU] : EXIT
5 Press MENU again to access the
main menu.
5
∞
6 Press
or
to select "MANUAL
CH SET", then press OK or
The programmed channel informa-
tion list appears.
5 ∞ 23
7 Press
to select the
channel position broadcasting
scrambled programmes, then press
OK twice. The Manual Channel Set
screen appears.
3
8 Press
until "OFF" (Decoder
setting) begins blinking, and set it to
5
"ON" by pressing
or
9 Press OK. The programmed channel
information list appears.
10 Press MENU.
If you want to perform fine-
tuning
Fine-tuning is performed automatically
during Auto Channel Set, but you can
also perform fine-tuning manually.
1 Press MENU.
2 Press
CH SET", then press OK or
3 Press
want to tune begins blinking. Press
OK twice. The Manual Channel Set
screen appears.
4 Press
then press
3
.
clearest.
5 Press OK. The programmed channel
list appears.
6 Press MENU to exit the menu
operations.
If you want to change station
names
AV2
You can also change the station name
manually.
1 Press MENU.
2 Press to select "MANUAL CH
SET", then press OK or
3 Press
want begins blinking.
4 Press OK twice. The Manual
3
Channel Set screen appears.
.
5 If you want to change the station
name to registered one (P.18), press
3
until the station name (ID) begins
blinking, then press
new station name (ID) appears.
If you want to change the station
name to other than registered one,
press
station name (ID) begins blinking,
∞
.
then press
the characters (A–Z, 0–9, –, * , +, _
(space) and stop when the desired
character is indicated, then press
to enter. Enter the remaining
characters the same way (maximum
of 4).
• If you make a mistake, press
until the incorrect character begins
blinking. Then enter the correct
character by pressing
6 Press OK. The programmed channel
list appears.
7 Press MENU to exit menu opera-
tions.
5
∞
or
to select "MANUAL
3
.
5∞ 23
until the item you
3
until "+/–" begins blinking,
5
∞
or
until the picture is
3
.
5∞ 23
until the item you
5
∞
or
until the
3
until the first letter of the
5
∞
or
to cycle through
5
∞
or
— 17 —
ATTENTION
• If the channel positions are changed
or deleted, the Guide Programme
numbers that have been set are reset
or changed. If an attempt is made at
timer programming with
Plus+ system
"GUIDE PROG SET" screen
appears. Input the channel position on
which the broadcast for the
number is received.
• If the channels are added, set the
Guide Programme number for that
channel (station). ( "VIDEO Plus+
Set Up" on page 20)
3
2
.
VIDEO
in this state, the
PlusCode
Hide quick links:
Advertisement
Table of Contents
