Specifications - Philips VR1000/02X User Manual

B
EFORE
Miscellaneous
A cassette cannot be inserted.
The cassette does not eject.
The cassette ejects when you press RECORD, or when
you press VCR POWER or STANDBY/ON to set timer
recording.
S
PECIFICATIONS
Number of pre-programmable memory blocks
Design and specifications are subject to change without notice.
R
EQUESTING
General
Mains voltage
Mains frequency
Power consumption
Power ON
Power OFF
Power Save Mode
Ambient temperature
Relative humidity
Dimensions
Position for use
Video output channel
Possible number of TV channel
Number of days in advance
Tuner
Aerial input
VHF L:
VHF H:
Video
Input (VIDEO IN)
Output (VIDEO OUT)
Resolution
Signal/noise ratio
Audio
Input (AUDIO IN)
Output (AUDIO OUT)
Accessories supplied
S
Correction
• Insert the cassette with the window side up and the record
tab facing you.
• Check that a cassette tape is not already inserted. Press
0
EJECT
• Make sure the AC power cord is correctly connected to
an AC outlet.
• If the (Timer) indicator is lit on the display, press
VCR POWER or STANDBY/ON to cancel timer
recording, then press EJECT
• Make sure the record tab on the back of the cassette is not
removed. ( P.22)
AC 220 – 240V (AUTO)
50/60Hz
Approx. 24 W
Approx. 5.5 W
Approx. 3 W
+5°C to +40°C
10% to 80%
Approx. 435(W) x 94(H) x 343(D) mm
Mass Approx. 4.8kg
Horizontal
UHF E36 (adjustable between 22 — 69)
99
8
365 or every day, or every week
PAL I
47 — 89 MHz
104 — 300 MHz
302 — 470 MHz
UHF: 470 — 862 MHz
CATV
0.5 to 2.0 Vp-p, 75 ohms
1.0±0.2 Vp-p, 75 ohms
250 lines (VHS)
400 lines (S-VHS)
Better than 45 dB
–8 dBs, 50k ohms (0dBs=0.775 Vrms) – for RCA connector
–8 dBs, 10k ohms (0dBs=0.775 Vrms) – for SCART connector
–8 dBs, 1k ohms (0dBs=0.775 Vrms)
Remote control unit
RF coaxial cable
Batteries – R6(SUM-3)/AA (only for checking operations)
— 38 —
ERVICE
.
0
.
(C )
ONTINUED