Tape Duplication - Philips VR1000/02X User Manual

A
DVANCED

Tape Duplication

Connection
Diagram
Recorder
S OUT
AV1 OUT
AV1 IN/OUT
COMP. Y/C
AV2 IN/DECODER
LP30363-002 LP20654-002
21-pin SCART Cable
Another VCR
Player
Dubbing from any VCR (or video
camera) to another is simple.
Explanations on this page uses this
VCR as the recording VCR.
Refer also to the manual supplied with
the other VCR (for playback).
Note:
When this VCR is using the
recording VCR,
You can also use S-Video or Video/
Audio input jacks on the front panel if
another VCR has S-Video or Video/
Audio output jacks.
When this VCR is using the playing
VCR,
You can use the following connector or
jacks.
• AV1 IN/OUT connector (Rear
panel): if another VCR has Scart
input connector.
Be sure to set the AV1 OUT switch
to appropriate position. ( P.9)
• S-Video/Audio output jacks (Rear
panel): if another VCR has S-Video/
Audio input jacks.
O
PERATIONS
1 Connect the recording VCR (this VCR) and the playing
VCR.
2 Connect the recording VCR (this VCR) to the TV.
Your VCR TV Receiver
ANT. IN
L
AUDIO
OUT
R
PAUSE
RF OUT
VIDEO
RF Cable
CHANNEL
or AV
mode
1
At VCRs
Insert a source tape in the playing VCR
and a blank tape in the recording VCR.
2
At TV
Tune the channel on the TV to your
video channel or external line input.
3
Select Line Input
Press Number button "0" and/or
PROG. +/– to select the line input.
• L-1: For rear panel AV1 IN/OUT
• L-2: For rear panel AV2 IN/
• S-1: For front panel S-Video/Audio
• F-1: For front panel Video/Audio
If you are using a rear panel AV1 IN/
OUT or AV2 IN/DECODER connector,
be sure to set the "AV1 SELECT" or
"AV2 SELECT" on the Mode Set
Screen to appropriate mode. ( P.27)
TV Recorder
connector.
DECODER connector.
input jacks.
input jacks.
— 32 —
(C )
ONTINUED
Recorder Your VCR
S OUT AV1 OUT
AV1 IN/OUT
COMP. Y/C
AV2 IN/DECODER
LP30363-002 LP20654-002
S-Video Cable
21-pin SCART Cable
Another VCR
Player
4
Select Tape Speed
Press SPEED, until the desired tape
speed (SP or LP) appears on the
display.
5
Play Back Tape
3
Press the PLAY
button on the
Playing VCR.
6
Record (Copy) Tape
¶
Press RECORD
at this VCR.
Remember: Press the buttons in step 5
and 6 simultaneously to avoid missing
any of the recording.
ANT. IN
L
AUDIO
OUT
R
PAUSE
RF OUT