Getting Connected Up; Vcr To Tv Connection Using The Rf Connection; Vcr To Av Tv Connection Using The Scart Connection - Philips Show View VR1600 User Manual

G
ETTING

VCR to TV Connection using the RF connection

Connection
Diagram
Outdoor antenna
Cable
CAUTION
Do not plug the AC power cords until all
connections are completed.

VCR to AV TV Connection Using the SCART Connection

Make this connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference.
And if you are using a stereo TV, you will need this cable in order to enjoy stereo playback of videotapes.
1. Complete the VCR to TV connection
using RF Connection.
2. Connect the scart cable between the AV1
(L-1) IN/OUT connector of the VCR and
the TV's 21-pin AV input connector
(SCART).
ATTENTION
When performing Auto Set Up or
Follow TV ( P.10), no colour may
appear on the TV. In this case, set
"A/V1 OUTPUT" to appropriate set-
ting on the Menu screen after Auto Set
Up or Follow TV ( P.32 "Selecting
AV1 and AV2 Output/Input signal").
C
ONNECTED
To connect to a TV with No 21-pin AV input connector.
1 Disconnect the antenna or cable from the TV and the AC power cord
of the TV from the AC outlet.
2 Connect the antenna or cable to the VCR.
3 Connect the VCR to the TV using the RF coaxial cable.
4 Plug the AC power cords of the VCR and TV into the AC outlets.
Indoor antenna
OUT
S
SORTIE
PAUSE
TELEC.
Back of VCR
U
P
ANT. IN
ANT. IN
ANTENNE
ENTREE
SYNCHRO EDIT
MONTAGE SYNCHRO
IN/OUT
AUDIO
ENTREE/SORTIE
L AV1 (L-1) IN/OUT
OUT
SORTIE
IN/DECODER
R
ENTREE/DECODEUR
RF OUT
AV2 (L-2) IN/DECODER
ANTENNE
LP30713-006
LP20916-006 SORTIE
RF coaxial cable
RF OUT (supplied)
OUT SYNCHRO EDIT
S
SORTIE MONTAGE SYNCHRO
IN/OUT
AUDIO ENTREE/SORTIE
L
AV1 (L-1) IN/OUT
OUT
SORTIE
IN/DECODER
R
ENTREE/DECODEUR
PAUSE AV2 (L-2) IN/DECODER
TELEC.
LP30713-006
LP20916-006
21-pin
SCART cable
— 8 —
Back of TV
VH F
UH F
From antenna
Back of TV
ANT. IN
ANTENNE
ENTREE
RF OUT
ANTENNE
SORTIE
To TV
To TV`s 21-pin
input connector
(SCART)