N Release/J/Image Stabilizer; O Release/J/Image Stabilizer - Olympus E-M1 Mark III Instruction Manual

N Release/j/Image Stabilizer

Option
S-AF Release
Priority
C-AF Release
Priority
jL Settings
4
jH Settings
Flicker Reduction

O Release/j/Image Stabilizer

Option
K Image
Stabilizer
j Image
Stabilizer
Half Way Rls
With IS
Lens I.S. Priority
186 EN
If [On] is selected, the shutter can be released even when
the camera is not in focus. This option can be set separately
for S-AF and C-AF modes (P. 64).
• Regardless of the option selected, [S-AF Release Priority]
is used when [FAF] is selected for AF mode.
• This item is for still photography.
Choose frame advance rates and shot limits for [j],
[♦j], and [♥j] modes. You can also adjust Pro Capture
settings, including the frame advance rate, number of
frames buffered, and the shot limit. Figures for sequential
shooting speed are the approximate maximums.
• This item is for still photography.
Reduce fl icker in photos taken under fl uorescent or other
artifi cial lighting.
• This item is for still photography.
[ Anti-Flicker LV]: Reduce fl icker during live view under
some kinds of lighting, including fl uorescent lamps. If [Auto]
does not have the desired effect, select [50 Hz] or [60 Hz]
according to the frequency of the local power supply.
[ Anti-Flicker Shooting]: The camera automatically detects
the fl icker frequency and times the shutter release
accordingly.
Adjust image stabilization settings for still photography.
Choose whether the camera prioritizes frame rate or image
stabilization during burst photography.
• [j Image Stabilizer] is fi xed at [Fps Priority] in q (Pro
Capture Low) and p (Pro Capture High) modes.
[Fps Priority]: Shooting speed gets priority over image
stabilization. The sensor will not be reset to the center
during sequential shooting.
[IS Priority]: Image stabilization gets priority over shooting
speed. The sensor will be reset to the center per frame of
sequential shooting. The shooting speed will drop slightly.
When set to [Off], the IS (Image Stabilization) function while
the shutter button is pressed halfway will not be activated.
Select [On] to give priority to lens on-board image
stabilization when shooting with third-party lenses. [S-IS1]
will be used when [S-IS AUTO] is selected for [K Image
Stabilizer] (P. 97).
• This option has no effect on lenses that are equipped with
an image stabilization switch.
Description
Description
MENU
G N
g
—
220
222
MENU
G O
g
97
—
—
—