Attaching The Strap - Olympus E-M1 Mark III Instruction Manual

Attaching the Strap

1 Before attaching the strap, remove the end
from the keeper loop and loosen the strap
as shown.
2
Pass the end of the strap through the strap eyelet and back
through the keeper loop.
3
Pass the end of the strap through the buckle and tighten as shown.
• Attach the other end of the strap to the other eyelet.
• After attaching the strap, pull on it fi rmly to ensure that it will not come loose.
Attaching the cable clip
Use the cable clip to secure the cable, then attach it
to the strap.
The cable clip can also be attached to the strap
eyelet.
Keeper loop
1
EN 19