Olympus E-M1 Mark III Instruction Manual page 125

 Adjusting Zoom During Filming (Movie H)
You can zoom in on a selected area of the frame for movie recording without using lens
controls. Use for instant close-ups or cuts to wider angle. Buttons or touch controls
can be used to choose the zoom location and cut to close ups or wide angles during
fi lming.
[Movie H] is a [n Button Function] option. It turns on or off with a button and so must
be assigned to a control using [n Button Function] (P. 116).
• This feature is not available when [4K] or [C4K] is selected for [nK] > [Movie
Resolution].
• This feature cannot be used to fi lm high-speed movies.
• [Movie H] cannot be combined with [Digital Tele-converter] (P. 143).
Using [Movie H]
Press the button to which [Movie H] is assigned.
1
• A frame will appear in the center of the display.
2
Position the frame as desired.
• Position the frame using touch controls, the multi
selector, or the arrow pad (FGHI).
• To re-center the frame, press the multi selector once or
press and hold the Q button.
Press the button to which [Movie H] is assigned once more.
3
• The camera will zoom the selected area in to fi ll the display.
• To return to the zoom frame, press the button to which [Movie H] is assigned a third
time.
To end zoom, press the Q button once, or press and hold the button to which
4
[Movie H] is assigned.
L L
123
min R R
TC 00:00:00:00 DF
C-AF
ISO-A
200
n
250 F5.6 0.0
Multi selector
2
M-IS M-IS 1
4K
30 p 30 p
1:02:03
EN 125