Olympus E-M1 Mark III Instruction Manual page 213

Choose a fi ne-tuning value using the FG buttons and press the Q button.
5
• The selected value will be saved. If you chose [Default Data], the options shown in
Step 2 will be displayed.
• If you chose [Lens Data], the dialog shown in Step 3 will be displayed. The display
will show the name of the lens for which the fi ne-tuning value was saved.
• Rotate the front dial to zoom in and check focus.
• Before pressing the Q button, press the shutter button to take a test shot and check
focus.
• To save another fi ne-tuning value for the current lens, press the I button and repeat
the process from Step 4.
6
To fi ne-tune focus for the same lens but in a
different area of the frame, highlight the lens name
using the FG buttons and press the I button.
• Repeat the process from Step 4.
When the process is complete, press the MENU button repeatedly to exit the
7
menus.
 Deleting Saved Values
Highlight [AF Focus Adj.] in G Custom Menu L
1
and press I on the arrow pad.
Highlight [Lens Data] using the FG buttons and
2
press the I button.
Use the FG buttons to highlight the name of the
3
lens you wish to delete from the fi ne-tuning list and
then press the I button.
Data List
100
%
Create Lens Data Set
1 50-200 F2.8-3.5
Back
A3. AF/MF
100
%
AF Targeting Pad
A1
1
A2
AF Limiter
2
A3 A3
AF Illuminator
A4
Face Priority
B1
AF Focus Adj.
B2
C1
C2
Back
A3. AF/MF
100
%
AF Targeting Pad
A1
1
A2 AF Limiter
2
A3 A3
AF Illuminator
A4
Face Priority
B1
AF Focus Adj. Off
B2
Default Data
C1
C2
Lens Data
Back
Data List
100
%
Create Lens Data Set
1 50-200 F2.8-3.5
Back
4
Set
Off
Off
On
Off
Off
Set
Off
Off
On
Off
Off
Set
Set
EN 213