Selecting A Waypoint - Garmin G500H Pilot's Manual

3.3.2.1

Selecting a Waypoint

1) While viewing the Waypoint Information page of the FPL page group, press
the MFD knob and use the large and small MFD knobs to move the cursor to
select the identifier for the waypoint.
2) Press the ENT key to select the waypoint.
OR
1) While viewing the Waypoint Information page of the FPL page group, press the
small MFD knob.
2) Turn the small MFD knob counterclockwise.
3) Turn the small MFD knob to show FPL, NRST, or RECENT.
4) Turn the large MFD knob to highlight the desired airport, and then press ENT.
190-01150-02 Rev. J
Figure 3-99 Waypoint Selection
Figure 3-100 Waypoint Category Selection
Garmin G500H Pilot's Guide
3-69