2.2.1
Markings
A color-coded speed range strip is located on the moving tape. The colors are
configured to match the approved markings for the installation. See the AFM/
POH.
NOTE : The actual colors and patterns of the airspeed tape may vary by
installation. See your AFM/POH for more details.
2.2.2
Reference Speeds
V-speeds (Glide and V
but can be changed and turned on/off from the System Setup page on the first
page of the Aux page group. When active (on), the V-speeds are displayed at
their respective locations to the right of the airspeed scale.
190-01150-02 Rev. J
) default values are set during the installation process,
Y
Glide Reference Marker
V
Reference Marker
y
Figure 2-8 Reference Speeds
Garmin G500H Pilot's Guide
2-7