Jeppesen Databases; Updating The Jeppesen Aviation Database - Garmin G500H Pilot's Manual

Jeppesen Databases

The aviation database is updated on a 28 day cycle. Aviation database updates
are provided by Garmin and may be downloaded from the Garmin web site
"fly.garmin.com" onto a Garmin provided Supplemental data card. Contact
Garmin at fly.garmin.com for navigation database updates and update kits. The
aviation database is stored internally and the data card is only used to transfer
the database into the unit.
The optional ChartView database is updated on a 14 day cycle. The ChartView
database is provided directly from Jeppesen. ChartView is an optional feature
that requires enablement by a Garmin dealer. Contact Jeppesen (www.jeppesen.
com) for ChartView subscription and update information.

Updating the Jeppesen Aviation Database

1) With the G500H System OFF, insert the SD card containing the aviation
database update into the upper card slot of the GDU 620 to be updated (label
of SD card should face up).
2) Turn the G500H System ON.
3) Verify the correct update cycle is loaded during power-up. Press the ENT key to
continue or the CLR key to cancel loading.
190-01150-02 Rev. J
Figure A-1 Database Initialization Display
Garmin G500H Pilot's Guide
A-3