3.2.4.2
Resolving Database Conflicts
If the G500H determines that there are multiple LRUs with the newest cycle
of a database, but they have different regions or types of that database (i.e.;
Fixed-wing vs. Rotorcraft navigation database, different regions of the navigation
database, or different obstacle database types) then a database conflict will
occur. When a database conflict occurs, that database will not be SYNC'd until
the pilot resolves the conflict. Initiate the resolve conflicts function on the unit
that contains the databases which the pilot wishes to use. These databases will
then be sent to other units.
1. Press the DB SYNC soft key, and then select the Resolve
Conflicts function on the LRU with the desired databases.
Figure 3-62 Database Conflicts
3-46
Garmin G500H Pilot's Guide
190-01150-02 Rev. J