Lexus GS 350 Owner's Manual page 93

92
1-2. Theft deterrent system
NOTICE
To ensure the system operates correctly
■
Do not modify or remove the system. If modified or removed, the proper operation of
the system cannot be guaranteed.
Intrusion sensor (if equipped) and tilt sensor (if equipped)
The intrusion sensor detects intruders or movement in the vehicle.
●
The tilt sensor detects changes in vehicle inclination, such as when the vehicle
●
is towed away.
This system is designed to deter and prevent vehicle theft but does not guarantee
absolute security against all intrusions.
The intrusion sensor and tilt sensor can be canceled using the cancel switch.
Setting the intrusion sensor and tilt sensor
■
The intrusion sensor and tilt sensor will be set automatically when the alarm is
set. (P. 90)
Canceling the intrusion sensor and tilt sensor
■
If you are leaving pets or other moving things inside the vehicle, make sure to
stop the intrusion sensor and tilt sensor before setting the alarm, as it will
respond to movement inside the vehicle.
Turn the engine switch off.
1
Press the intrusion sensor and tilt
2
sensor cancel switch.
A message will be shown on the
multi-information display in the
instrument cluster.
Press the switch again to re-enable
the intrusion sensor and tilt sensor
cancel switch.
Canceling and automatic re-enabling of the intrusion sensor and tilt sensor
■
The alarm will still be set even when the intrusion sensor and tilt sensor are canceled.
●
After the intrusion sensor and tilt sensor are canceled, pressing the engine switch or
●
unlocking the doors using the entry function, wireless remote control or mechanical
key will re-enable the intrusion sensor and tilt sensor.
The intrusion sensor and tilt sensor will automatically be re-enabled when the alarm
●
system is deactivated.
GS350_300_GS F_OM_OM30J17E_(GE)