234
4-2. Driving procedures
Turn signal lever
Operating instructions
The lever will return to its original position immediately after operation.
Right turn
1
Lane change to the right (move the
2
lever partway and release it)
The right hand signals will flash 3 times.
Lane change to the left (move the
3
lever partway and release it)
The left hand signals will flash 3 times.
Left turn
4
If the turn signals do not stop flashing after turning left or right, or if you want
■
to stop them flashing
Operate the lever in the opposite direction to either position
If you move the lever to either position
flash.
Turn signals can be operated when
■
The engine switch is in IGNITION ON mode.
If the indicator flashes faster than usual
■
Check that a light bulb in the front or rear turn signal lights has not burned out.
If the turn signals stop flashing before a lane change has been performed
■
Operate the lever again.
GS350_300_GS F_OM_OM30J17E_(GE)
2
or
, the selected turn signals will
1
4
or
.
3