500
6-3. Do-it-yourself maintenance
When installing, reverse the steps listed.
4
After installing the bulb base, secure the cord with the clips and if replacing the left
side bulb, make sure to install the bolt for the washer fluid filler opening in its origi-
nal position.
Right side
Outer foot lights
■
Press the upper part of the out-
1
side rear view mirror to tilt the
mirror face upward, and apply
protective tape to the lower part
of the mirror cover.
Insert 2 flathead screwdrivers
2
wrapped in protective tape, and
disconnect the tabs behind the
mirror.
Pry the mirror out toward you, dis-
connecting the 2 tabs at a time.
Work carefully, ensuring that you do
not drop the mirror.
GS350_300_GS F_OM_OM30J17E_(GE)
Left side