Lexus GS 350 Owner's Manual page 504

503
6-3. Do-it-yourself maintenance
Install the cover of the back end
10
of the mirror, installing the lower
side and the upper side in that
order.
When installing the lower side of the
cover, insert the side turn signal light
pin into the hole in the cover.
Secure the cover with screws and
11
reconnect the connectors back
together.
Secure the cords by returning them
to the hooks as they were.
6
Align the tabs, and secure the
12
mirror by pushing in each diago-
nally-opposite pair of tabs in
order.
Make sure to insert the tabs in order
as shown in the illustration, and push
them in until a click is heard.
If you do not hear the click, do not
force the tabs in. Instead, remove the
mirror and check that the tabs are
aligned.
GS350_300_GS F_OM_OM30J17E_(GE)