Lexus GS 350 Owner's Manual page 503

502
6-3. Do-it-yourself maintenance
After installing the new bulb,
7
secure the socket to the light
body.
When inserting the socket, align the
marks printed on the light body and
the socket.
Install the visor cover on the mir-
8
ror frame, secure it with a screw,
and install the side turn signal light
and outer foot light.
Use only the screw position shown in
the illustration.
Side turn signal light: Align the tabs
on the light and the cover and install.
Outer foot light: Interlock the tabs in
the groove of the light body with
those on the cover, and secure.
Disconnect the tabs, and sepa-
9
rate the top and bottom of the
rear side cover of the mirror.
GS350_300_GS F_OM_OM30J17E_(GE)