Tire inflation pressure (if equipped)
■
It may take a few minutes to display the tire inflation pressure after the engine switch is
●
turned to IGNITION ON mode. It may also take a few minutes to display the tire infla-
tion pressure after inflation pressure has been adjusted.
"---" may be displayed if the tire position information cannot be determined due to
●
unfavorable radio wave conditions.
Tire inflation pressure changes with temperature. The displayed values may also be dif-
●
ferent from the values measured using a tire pressure gauge.
When disconnecting and reconnecting battery terminals
■
The following information data will be reset:
Lap timer: Measured lap times, history
●
G-force: Record of the maximum G-forces
●
Using the lap timer
■
If the engine is stopped while a lap is being timed, the lap timer will stop and the lap time
up to that point will be recorded.
Liquid crystal display
■
P. 107
WARNING
Caution for use while driving
■
When operating the multi-information display while driving, pay extra attention to the
●
safety of the area around the vehicle.
Do not look continuously at the multi-information display while driving as you may fail
●
to see pedestrians, objects on the road, etc. ahead of the vehicle.
Cautions during setting up the display
■
As the engine needs to be running during setting up the display, ensure that the vehicle
is parked in a place with adequate ventilation. In a closed area such as a garage,
exhaust gases including harmful carbon monoxide (CO) may collect and enter the
vehicle. This may lead to death or a serious health hazard.
NOTICE
During setting up the display
■
To prevent battery discharge, ensure that the engine is running while setting up the dis-
play features.
GS350_300_GS F_OM_OM30J17E_(GE)
2. Instrument cluster
135
2