132
2. Instrument cluster
Switching the display
●
To switch to advanced display, press
To return to normal display, press
Resetting the record of maximum G-forces
●
With the record of maximum G-forces displayed, press and hold
reset the display.
Peak hold function (advanced display only)
●
If lateral G-forces of 0.5 G or
greater are generated, the G-
force value displayed on the main
meter will turn yellow and be held
for 3 seconds.
Tire inflation pressure (if equipped)
■
Displays the tire inflation pressure (P. 475)
Unlike the tire pressure display on the drive information menu, the tire inflation
pressure display of the "F" content menu can be displayed while lap time is being
measured.
Settings display
The settings of the following items can be changed, refer to P. 627
For functions that can be enabled or disabled, the function switches between on and
off each time
■
■
■
■
GS350_300_GS F_OM_OM30J17E_(GE)
is pressed.
(Lane Departure Alert with steering control) (if equipped)
(Lane-Keeping Assist) (if equipped)
(Pre-Crash Safety system) (if equipped)
(Blind Spot Monitor) (if equipped)
.
.
to
(P. 295)
(P. 285)
(P. 272)
(P. 337)