Commands; Syscmd_Reset - Siemens SIMATIC RF1000 Operating Instructions Manual

6.3.2

Commands

For a textual description of how the various commands work, refer to the section "Functions
of the USB/RS232 interface for Windows (Page 22)".
6.3.2.1

syscmd_reset

Max. reader response time: 100 ms
Table 6- 21
Byte
0
1
2
3 ... 4
5
Table 6- 22
Byte
0
1
2
3 ... 4
5
SIMATIC RF1000
Operating Instructions, 02/2020, C79000-G8976-C432-07
6.3 Programming via the RS232 interface (using the Freeport protocol)
Request telegram
Value Description
0x0C Without checksum
0x1C With checksum
0x00 DevCode of the command set containing the command to be called.
0x03 CmdCode of the command to be called.
0x00 Parameter length (0 bytes)
0xC2 Optional checksum (when the value "0x1C" is set in byte 0)
Response telegram without errors
Value Description
0x0C Without checksum
0x1C With checksum
0x00 DevCode of the command set containing the command to be called.
0x03 CmdCode of the command to be called.
0x00 Parameter length (0 bytes)
0xC2 Optional checksum (when the value "0x1C" is set in byte 0)
Programming
43