Autoread_Setmode - Siemens SIMATIC RF1000 Operating Instructions Manual

6.3.2.10

Autoread_SetMode

Max. reader response time: 100 ms
Table 6- 44
Byte
0
1
2
3
4
5
6
Table 6- 45
Byte
0
1
2
3 ... 4
5
SIMATIC RF1000
Operating Instructions, 02/2020, C79000-G8976-C432-07
6.3 Programming via the RS232 interface (using the Freeport protocol)
Request telegram
Value Description
0x0C Without checksum
0x1C With checksum
0x05 DevCode of the command set containing the command to be called.
0x00 CmdCode of the command to be called.
0x01 Parameter length (1 byte)
0x00
0xXX Autoread:
Off (0x00)
•
On, permanently (0x01)
•
On, once (0x02)
•
0xXX Optional checksum (when the value "0x1C" is set in byte 0)
Response telegram without errors
Value Description
0x0C Without checksum
0x1C With checksum
0x05 DevCode of the command set containing the command to be called.
0x00 CmdCode of the command to be called.
0x00 Parameter length (0 bytes)
0xC4 Optional checksum (when the value "0x1C" is set in byte 0)
Programming
53