Syscmd_Get_Boot_Status - Siemens SIMATIC RF1000 Operating Instructions Manual

6.3.2.3

syscmd_get_boot_status

Max. reader response time: 50 ms
Table 6- 25
Byte
0
1
2
3 ... 4
5
Table 6- 26
Byte
0
1
2
3
4
5 ... 8
9
SIMATIC RF1000
Operating Instructions, 02/2020, C79000-G8976-C432-07
6.3 Programming via the RS232 interface (using the Freeport protocol)
Request telegram
Value Description
0x0C Without checksum
0x1C With checksum
0x00 DevCode of the command set containing the command to be called.
0x05 CmdCode of the command to be called.
0x00 Parameter length (0 bytes)
0xC4 Optional checksum (when the value "0x1C" is set in byte 0)
Response telegram without errors
Value Description
0x0C Without checksum
0x1C With checksum
0x00 DevCode of the command set containing the command to be called.
0x05 CmdCode of the command to be called.
0x04 Parameter length (4 bytes)
0x00
0x00 Boot status = 0x00 (OK)
0x48 Optional checksum (when the value "0x1C" is set in byte 0)
Programming
45