Classic Console Global User Station; Preinstallation; Placement; Grounding - Honeywell TotalPlant LCN System Installation

16

CLASSIC CONSOLE GLOBAL USER STATION

Section 16
Provides for the installation of the Global User Station in new console furniture.
Use ESD
Wrist Strap
Use an ESD Wrist Strap grounded to the Electronics chassis when
ESD Wrist Strap
connecting or disconnecting cables.

16.1 PREINSTALLATION

Before starting to install the Global User Station hardware, the additional LCN cables,
Cable A and Cable B, must be installed (or run to) to the location of the Global User
Station unit. The T-connectors (and terminators, if applicable) must be located directly
below the location of the Global User Station Electronics. The cable must allow enough
length to reach into the LCN MAU in the bottom of the cabinet and connect to the LCN
MAU.

16.2 PLACEMENT

A Global User Station in console furniture can be installed as an integral part of a console
by following the instructions for complexing stations together as a console as described in
subsection 3.5.

16.3 GROUNDING

Connect the safety ground connection to the station as described in Section 4.

16.4 AC POWER

Connect the ac power as described in Section 5.
LCN System Installation 16-1 9/96